Publication Opportunities | Mechanical Conferences

  • Home
  • Publication Opportunities | Mechanical Conferences


  • Several Publication windows are introduced in this Call including Conference Proceedings, indexed journals. Make sure to Select ONLY ONE of the Publication opportunities. Simultaneous submissions can potentially lead to copyright violations or disputes if the work is published in different publications.
  • Check the scope of each publication opportunity and select the ONE that best matches the theme of your paper.
  • Strictly follow the submission guide for each publication opportunity.


28 January 2023

 Conference Proceedings

Conference Proceedings will be published with ISBN Number. All full papers submitted for conference proceedings will be accepted through a double-blind review process and will be published electronically in proceedings with a DOI number.

To submit your paper for proceedings publication, prepare your paper according to the template and submit your final full paper.


  • Accepted file types: doc, docx, Max. file size: 32 MB.
    Allowed file extensions: doc, docx

Peer-Reviewed Journal Publication

Important NOTES before Journal Submission:

  1. Carefully read the Scope of the selected journal before submission, otherwise your paper will be rejected without a review process.
  2. The decision of whether or not the submission can be included in the journal publication remains at the full discretion of the journal editors and is subject to the results of the double-blind peer review and the satisfactory completion of any revisions required.
  3. If you select a journal with a Direct Submission Link, include a note to the Editorial Board with information about the conference and the Organizer.

Curved and Layered Structures (CLS)

The aim of Curved and Layered Structures is to become a premier source of knowledge and a worldwide-recognized platform of research and knowledge exchange for scientists of different disciplinary origins and backgrounds (e.g., civil, mechanical, marine, aerospace engineers and architects). The journal publishes research papers from a broad range of topics and approaches including structural mechanics, computational mechanics, engineering structures, architectural design, wind engineering, aerospace engineering, naval engineering, structural stability, structural dynamics, structural stability/reliability, experimental modeling and smart structures. Therefore, the Journal accepts both theoretical and applied contributions in all subfields of structural mechanics as long as they contribute in a broad sense to the core theme.

ISSN: 2353-7396

Journal Link

Indexing/Abstracting: Scopus, ADS, Baidu Scholar, CNKI Scholar, CNPIEC – cnpLINKer, Dimensions, DOAJ, EBSCO and many other databses.

Scopus index link

Publication fee: €500 (After the acceptance of the manuscript)

Submission Link:

Manuscripts should be submitted to the journal via ethe Online Submission platform:

  • Include a note to the Editorial Board with information about the conference and the organizer.
  • For complete instructions, please carefully following guidelines described in “Instructions for Authors” file.

CLS – Instructions for Authors

European Journal of Engineering Science and Technology (EJEST)

European Journal of Engineering Science and Technology is an international journal of research in Engineering Science and Technology aims to provide a common platform to disseminate the original research work. EJEST is a peer-reviewed journal with a key objective to provide the academic and industrial group of people a medium for presenting original research and applications related to Engineering Science, Technology and Application. It is a completely online journal. The mission of this journal is to publish original contributions in its field in order to spread knowledge amongst its readers and to be a reference publication.

ISSN: 2538-9181

Journal Link:

Publication fee: No APC

Indexing/Abstracting: Index Copernicus, DRJI, ResearchBib, Scientific Indexing Services, Scientific Indexing Services, Scilit, CiteFactor, WCOSJ, and Google Scholar. EJEST has linked its papers to references by DOIs assigned by Crossref.

Submission Link:

Register in the following link and submit your paper on the Journal online Submission platform:

Manuscripts should be organized as follows:

  • Title page: List title, authors, and affiliations as first page of manuscript
  • Abstract: an abstract should summarize the key points of the manuscript in 150 to 250 words. An abstract is a short summary of a larger work for the purpose of condensing the argument, conclusions, and/or results into a paragraph. After the abstract, please supply up to five keywords or brief phrases.
  • Manuscript should follow the style detailed in the APA publication manual.
  • Introduction
  • Materials and Methods
  • Results
  • Discussion
  • Conclusions (optional)
  • Acknowledgments (if applicable)
  • References: This journal uses “APA” Reference style. Each listed reference should be cited in text, and each text citation should be listed in the references section.
  • Supporting information captions (if applicable)
  • Figure captions are inserted immediately after the first paragraph in which the figure is cited.
  • Tables are inserted immediately after the first paragraph in which they are cited.

Modern Mechanical Engineering (MME)

Modern Mechanical Engineering (MME) is an international journal dedicated to the latest advancements in mechanical engineering. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of mechanical engineering.

ISSN Print: 2164-0165

ISSN Online: 2164-0181

Journal Link:

Indexing/Abstracting: Google Scholar, Base Search, CALIS, ChaoXing Periodicals, CiteFactor, Cnplinker, COPAC, CQVIP, CrossRef, DTU Findit, Elektronische Zeitschriftenbibliothek(EZB), ERA 2018 Journal List, Harvard Library E-Journals, Infotrieve, i-Scholar, JournalSeek, JournalTOCs, National Center for Philosophy and Social Sciences Documentation, National Science and Technology Library(NSTL), Open Access Library

Open J-Gate, Research Bible, ResearchGate, SciLit and many more.

Publication fee: 463 EUR

  • Accepted file types: doc, docx, Max. file size: 32 MB.
    Allowed file extensions: doc, docx
  • This field is for validation purposes and should be left unchanged.

Article type: One Column

Manuscript organization:
1. All manuscripts are expected to be prepared as a single PDF or MS Word document with the complete text, references, tables and figures included. Any revised manuscripts prepared for publication should be sent as a single editable Word document. LaTex paper is also acceptable for publication, but it should be in PDF for review first.

2. Manuscripts should be written in English. Title, author(s), and affiliations should all be included on a title page as the first page of the manuscript file, followed by a 100-300 word abstract and 3-5 keywords. The order they follow is: Title, Authors, Affiliations, Abstract, Keywords, Introduction.

Figure and table requirement:
3. All figures or photographs must be submitted as jpg or tif files with distinct characters and symbols at 500 dpi (dots per inch). Test your figures by printing them from a personal computer. The online version should look relatively similar to the personal-printer copy. Tables and equations should be in an editable rather than image version. Tables must be edited with Word/Excel. Equations must be edited with Equation Editor. Figures, tables and equations should be numbered and cited as Figure 1, Figure 2, Figure 3, etc. in sequence.

How to count page numbers:
4. Before submission or after acceptance, type your manuscript single spaced, and make all the characters in the text, tables, figure legends, footnotes and references in a single typeface and point size as 10 pt Times New Roman. This will save space, make it easier for reviewers and editors to process the submitted work, and contributes to slowing down global warming by using less paper.

References format:
5. All references should be numbered in square brackets in the text and listed in the REFERENCES section in the order they appear in the text. Below are some examples:

Journal Articles:
[1] García, J.I., Sepúlveda, S. and Noriega-Hoces, L. (2010) Beneficial Effect of Reduced Oxygen Concentration with Transfer of Blastocysts in IVF Patients Older than 40 Years Old. Health, 2, 1010-1017.

[2] Maganioti, A.E., Chrissanthi, H.D., Charalabos, P.C., Andreas, R.D., George, P.N. and Christos, C.N. (2010) Cointegration of Event-Related Potential (ERP) Signals in Experiments with Different Electromagnetic Field (EMF) Conditions. Health, 2, 400-406.

[3] Bootorabi, F., Haapasalo, J., Smith, E., Haapasalo, H. and Parkkila, S. (2011) Carbonic Anhydrase VII—A Potential Prognostic Marker in Gliomas. Health, 3, 6-12.

E-Journal Articles:
[4] Bharti, V.K. and Srivastava, R.S. (2009) Protective Role of Buffalo Pineal Proteins on Arsenic-Induced Oxidative Stress in Blood and Kidney of Rats. Health, 1, 167-172.

[5] Verdu, S. (1998) Multi-User Detection. Cambridge University Press, Cambridge.

Edited Book:
[6] Prasad, A.S. (1982) Clinical and Biochemical Spectrum of Zinc Deficiency in Human Subjects. In: Prasad, A.S., Ed., Clinical, Biochemical and Nutritional Aspects of Trace Elements, Alan R. Liss, Inc., New York, 5-15.

Conference Proceedings:
[7] Clare, L., Pottie, G. and Agre, J. (1999) Self-Organizing Distributed Sensor Networks. Proceedings SPIE Conference Unattended Ground Sensor Technologies and Applications, Orlando, 3713, 229-237.

[8] Heinzelman, W. (2000) Application-Specific Protocol Architectures for Wireless Networks. Ph.D. Dissertation, Massachusetts Institute of Technology, Cambridge.

[9] Honeycutt, L. (1998) Communication and Design Course.

Format Template

Journal of Hydrology and Hydromechanics (JHH)

JOURNAL OF HYDROLOGY AND HYDROMECHANICS is an international open access journal for the basic disciplines of water sciences. The scope of hydrology is limited to catchment hydrology, vadose zone hydrology and biohydrology, primarily of temperate zone. The hydromechanics covers theoretical, experimental and computational hydraulics and fluid mechanics in various fields, two- and multiphase flows, including non-Newtonian flow, and new frontiers in hydraulics. The journal is published quarterly in English. The types of contribution include: research and review articles, short communications and technical notes. The articles have been thoroughly peer reviewed by international specialists and promoted to researchers working in the same field. Authors do not pay any fees.

ISSN Online: 1338-4333

Journal Link:

Indexing/Abstracting: AGRICOLA (National Agricultural Library), Baidu Scholar, CABI (over 50 subsections), Chemical Abstracts Service (CAS) – Caplus, Chemical Abstracts Service (CAS) – SciFinder, CNKI Scholar (China National Knowledge Infrastructure), CNPIEC – cnpLINKer, Dimensions, DOAJ (Directory of Open Access Journals), EBSCO, Ei Compendex , Engineering Village, ExLibris, Geobase, GeoRef, Google Scholar, Japan Science and Technology Agency (JST), J-Gate, Journal Citation Reports/Science Edition, JournalGuide, JournalTOCs, KESLI-NDSL (Korean National Discovery for Science Leaders), MyScienceWork, Naver Academic, Naviga (Softweco) , Scopus and many more.

Scopus link:
Publication fee: No APC

Submission Link:

Manuscript (with maximum length of 30 pages and size of 5 MB) should be sent as an attachment to e-mail to Dr. Ľubomír Lichner, Institute of Hydrology SAS, Dúbravská cesta 9, 841 04 Bratislava, Slovakia; e-mail:

Manuscript should be prepared as Microsoft Word file with numbered lines and pages, paper size A4 (297 mm x 210 mm), font type Times New Roman, font size 12, double-spaced with margins of 25 mm. Sections and subsections should not be numbered. Manuscript should be written in English. Authors who are unsure of correct English usage should have their manuscript reviewed for clarity by a colleague whose native language is English or seek help at a professional English writing and editing service.
Manuscript should begin with a concise but informative title followed by the names of all authors with first name given in full for each author and the affiliations of the authors (without abbreviations) including complete postal addresses. Telephone number (with country and area code) as well as e-mail address of the corresponding author should be presented in the next line. The abstract not exceeding 200 words should state briefly the purpose of the research, the principal results and major conclusions.
Keywords, placed immediately after the abstract, should provide a maximum of 6 key words, which reflect the scientific content of the paper. The introduction should state the objectives of the work and provide an adequate background. Material and methods should provide sufficient detail to allow the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications should be described. A Theory section can be added when the authors propose new theories and solutions. Results should be clear and concise. Discussion should explore the significance of the results, not repeat them. A combined Results and Discussion section is often appropriate. The main conclusions of the study may be presented in Conclusions section. Acknowledgements should be assembled in a separate section at the end of the article before the references.
Figures should be informative, attractive and readable. Design them to fit either into 1 column (8.6 cm), intermediate width (12 cm) or to the width of the page (17.8 cm). At this print size, the photographs should have a minimum resolution 300 dpi, bitmapped graphs and drawings 1000 dpi, combinations of photographs and drawings 500 dpi. Vector drawings should contain all the used fonts and the minimum line thickness should be 0.25 pt. Avoid any large size differences of the numbers, letters and symbols used within the figure. They must be sufficiently large such that they are at least 1.5 mm high in final printed form. Do not hide unwanted data in masks or layers. Do not use outer boxes or frames. Each figure with the figure caption should be arranged on a separate page at the end of the manuscript. After accepting the paper for publication, the figures should be submitted in TIFF, JPEG, EMF, WMF or MS Office files. If the figure is created in a MS Office (Word, PowerPoint, Excel) then leave it in the native document format “as is”. Make sure that the caption can be understood without the need for undue reference to the text. Every figure must be referred to in the text and numbered using Arabic numerals consecutively in accordance with their appearance in the text. Prepare tables separately from the text and put each on a separate page with its heading and with double spacing if there is room. Make sure that the table heading can be understood without the need for undue reference to the text. Every table must be referred to in the text and numbered using Arabic numerals consecutively in accordance with their appearance in the text. Footnotes to a table should be indicated by superscript lower-case letters and typed directly under the table. Please save the table as editable text and not as image. Only units of the SI and those units recognized for use with the SI should be used to express the values of quantities. Standardized quantity symbols and standardized mathematical signs and symbols should be used. A space or half-high dot is used to signify the multiplication of units. A solidus (i.e., slash) or negative exponent is to signify the division of units. The solidus must not be repeated on the same line unless parentheses are used. Symbols representing physical quantities or variables are italic, symbols representing units or mathematical operators are roman, and symbols representing vectors, tensors and matrices are bold italic. For equations use the Equation Editor of Microsoft Word or MathType. The equations should be editable and not presented as images.

All references cited in the text are included in the reference section and opposite.
Text: Citations may be made directly or parenthetically. Groups of references should be listed first alphabetically, then chronologically. Examples: … by Lukerchenko et al. (2009), Ruch and Harum (2009), and Warren (2003), or: … (Lukerchenko et al., 2009; Novák, 2012; Ruch and Harum, 2003). List: References should be arranged first alphabetically and then further sorted chronologically if necessary. More than one reference from the same author(s) in the same year must be identified by the letters “a”, “b”, “c”, etc., placed after the year of publication.

Lukerchenko, N., Piatsevich, S., Chara, Z., Vlasak, P., 2009. 3D numerical model of the spherical particle saltation in a channel with a rough fixed bed. J. Hydrol. Hydromech., 57, 100–112.

Novák, V., 2012. Evapotranspiration in the Soil-Plant-Atmosphere System. Springer, Dordrecht, 256 p.

Ruch, C.A., Harum, T., 2003. Water balance components for forest and meadow land use systems in a crystalline catchment. In: Holko, L., Miklánek, P. (Eds.): Proc. Int. Conf. Interdisciplinary approaches in small catchment hydrology: monitoring and research (Demänovská dolina, Slovakia 2002). Technical Documents in Hydrology, No. 67, UNESCO, Paris, pp. 27–32.

Warren, S.D., 2003. Synopsis: Influence of biological soil crusts on arid land hydrology and soil stability. In: Belnap, J., Lange, O.L. (Eds.): Biological Soil Crusts: Structure, Function, and Management. Springer, Berlin, pp. 349–360.

JHH Instructions for authors